Oxygen absorbers.  You have heard about them and if you have done even the most basic research into long term food storage, you know that they are a necessary component when sealing up dry goods for the long haul.  But what are they?  Why are they necessary?  And how are they used?

Learning about Long Term Storage

The very first item I purchased for my survival pantry was a 25 pound sack of pinto beans.  Of course back then, I thought I would simply store the big bag in the garage and let it sit there until I needed it – you know, set it and forget it.  Luckily, I did my research and learned first and foremost that beans indeed have a shelf life and will turn as hard as rocks if not properly packaged and maintained in a cool, moisture free environment.  Who knew?

The light bulb came on as I was reading John Hill’s book How to Live on Wheat.  It was this little book that taught me not only about wheat (living and dead) but about storage containers, Mylar bags, desiccants, and yes, oxygen absorbers.  So, being the smarty pants that I am, I purchased a package of Mylar bags and oxygen absorbers and, with the help of Survival Husband, sent the beans flying as we learned the secrets of packaging.  (You can read all about this adventure in my article titled Getting Prepared Week 20: Hands on with Mylar Bags, Beans and the FoodSaver.)

Which brings me around to the present.  Never one to believe something unless I check things out myself, I wanted to know what was in these little packets and how could I learn to use them effectively for long term food storage.

What are oxygen absorbers made of?

The small oxygen absorber packets contain an iron powder that is enclosed in an outer wrapper that lets  oxygen and moisture in. The outer wrapper is strong enough to prevent leakage of the the powder back out into your food.

How to they work?

In the process of sucking up moisture, the iron in the absorber starts to rust.  This creates oxidation and before you know it, in a well sealed container, 99.99% of the oxygen is used up.  Any space or air left in the container is nitrogen – not oxygen – which is not a bad thing because insects can not thrive in pure nitrogen.

So, in simple terms, the little packet sucks up all of the oxygen from the air within the container in which it is placed.

Factoid:  Air is about 21 percent oxygen, 78 percent nitrogen and 1% other gasses.  Did you know that?

What about storage containers?

Still with me?  We are getting to the hard part.  As you do your research, you will hear over and over again that you should use oxygen absorbers in sealed Mylar bags.  And yes, it is true that they work extremely well when used with vacuum packaged Mylar bags.

But – and this is a big but – they can be used successfully to block out oxygen with other types of packaging, too.  All of the following will work:

• Metal cans with sealed lids.  Great if you have access to a canner or a local community kitchen.  For most of us, however, this is not a realistic and cost effective solution
• Mason jars with proper canning lids.  This is one of my favorites especially since I have a special attachment for my food saver that allows me to vacuum seal the mason jars quickly and easily.  And, just a personal thing, but I love looking at all of the products peeking out of those glass jars.
• Mylar bags.  These are heavy duty foil bags lined with a special plastic.
• Vacuum sealed bags (such as the Food Saver bags).  While not as heavy as the Mylar, these are much easier to handle especially if you already have the Food Saver machine itself.
• Plastic buckets with gamma seals.  These can be used alone or in combination with other Mylar or other bags such as those from the food saver.
• PETE plastic bottles with airtight, screw on lids.

What is the proper way to use oxygen absorbers?

There are just a few precautions that you need to be aware of when using oxygen absorbers.

• The most important precaution is to limit the unused packets from exposure to the air.  Take out only what you are going to use in the next 15 minutes or so and seal the rest up in a jar with a screw top lid.  Don’t put them in a zip lock bag because they will immediately suck up the residual oxygen and become useless.
• A good rule of thumb is to use one 300 cc oxygen absorber for each gallon of product.  For larger containers, you can purchase larger, 2000 cc oxygen absorbers which are ideal for 5 or 6 gallon buckets.
• Be mindful of the little pink pill.  Most reputable vendors will include a little pick pill with their package of absorbers.  If the pill is blue, the absorbers are toast so don’t use them.  However, if they are just starting to turn – not quite pink and not quite blue – they are probably okay since the change of color can happen in as little as 10 or 15 minutes.
• Another good test of their viability is to pick one up an hold it.  It may feel warm.  It will also feel soft and powdery, like a little pillow.  If it gets real hot and uncomfortable, it is in full out working mode and has probably been exposed to the air for too long to be usable.  In this case it may also start to feel hard and brick like.  Toss it.
• Oxygen absorbers themselves have a limited shelf life, even when sealed.  Only purchase an amount that you will use within a year.

Note:  If you start to do some research on your own, prepare to be confused.  You will find that some sources feel you should use a larger quantity of oxygen absorbers when packaging dried pasta and beans versus packaging grains, flours, and rice.  The reason for this is that the latter are more dense so there is less oxygen to get rid of.  You can come to your own conclusion but the overwhelming advice I received from respected vendors was that 300 cc’s per gallon or 2000 cc’s per bucket would do just fine.

A few other pointers

Almost anything can be packaged using oxygen absorbers and they are so inexpensive, there is no reason not to use them.  There are some things, however, that should be packaged without them.  They are sugar and salt.  Why?  Well the sugar will turn to a brick of concrete and the salt simply does not need anything special to keep it preserved.  It too may clump.

In addition, sprouting seeds need oxygen to stay alive (and ultimately germinate) so you would be defeating your purpose if you sealed them up with an oxygen absorber.

A bag sealed with product plus an oxygen absorber may or may not turn brick like in a day or two or even up to a week.  The ability to fully compress is dependent upon factors such as head room and the amount of air that was sucked out during the sealing process.  This is not a problem in spite of what you may read on the internet.  If you have used an oxygen absorber sufficient for the size of your packaging, the oxygen will be gone.  The extra air is simply nitrogen and it will not harm your food.  Of course, if it makes you feel better, you could open the package and start all over again but that is not really necessary for anything but your peace of mind.

A special thank you

I would like to thank Matt Rose at OakTea International for taking so much time explaining all things “oxygen absorber” to me during a lengthy phone conversation.  I had found his telephone number and email address on the packing list I received from Amazon and was thrilled that he was willing to answer all of my questions, some of which probably sounded silly.

OakTea is located in Redding, California and sells exclusively though their Amazon web store.  The owners are passionate about long term food storage and first got started in the late 90s, right before Y2K.

Need more information?

Stay tuned for the next installment:  Food Storage Part II – Mylar Bags.

Enjoy your next adventure through common sense and thoughtful preparation!

Gaye

Like this? You might also like:

Current SurvivalWoman picks:

• 60 – 300cc Oxygen Absorbers: This is one area where you want to make sure you are getting a quality product.  Currently, a pack of 60 (in three 20 unit packs) is about $15 with free shipping.
• 20 Gallon Size Mylar Bags: Another product I have purchase from OakTea through their Amazon store.
• 6-gallon Buckets with Gama Air-tight Lids:  I purchased 20 of these and am using them to store gallon sized packages of food in either Mylar or Food Saver bags.  With oxygen absorbers, of course.
• Food Saver Jar Sealer: For $10, I can use this gadget to vacuum seal anything and everything in a wide mouth mason jar.
• Emergency Essentials has the Volcano Stove with the propane option on sale for $129.99 which is just slightly more than the non-propane version that I purchased a couple of weeks ago (and reviewed last week).
• Lodge 12-Inch Pre-Seasoned Skillet:  The basic standby for all types of cooking, inside or out.
• Lodge Set of 2 Pan Scrapers:  A must have to go with that skillet.
• 550lb. Type III Paracord 100′ Black: I wish I had known about Paracord years ago.  With a recent price reduction to $7.47, there is no reason not to have a few hundred feet around your home, in your car, and in your bug out bag.

---

The Survival Store:  Check out the Backdoor Survival Store at www.thesurvivalstore.net.  Here you will find all of those great products from Amazon that have been mentioned in my articles.  I will soon be adding products from other vendors as well.  The dust is still settling and there is still a lot of work to be done but I hope you will pop on over and check things out.  Making a purchase from Amazon is a great way to support this blog and for that I THANK YOU!

Have a Food Storage Tip?  Announcing the first ever Backdoor Survival contest.  I am looking for the very best in long term food storage tips.  Have something to share?  Send your favorite food storage tips to [email protected]  At the end of August, the submitter of the best tip will win a copy of Jan’s Fabulous Food Storage Recipes.

Note to Advertisers:  Backdoor Survival is currently seeking a few quality advertisers.  For more information, click here.